Clean your Bissell CleanView Swivel by emptying the tank, washing filters, clearing clogs, and wiping key parts.
49% off Today's Exclusive Deals
Limited-time Exclusive Deals. Check current discount on Amazon.
Check Price on Amazon As an Amazon Associate I earn from qualifying purchases.Keeping a Bissell CleanView Swivel in good shape is one of those small chores that pays off fast. I’ve seen this vacuum go from weak suction and dusty smells to like-new performance with a simple cleaning routine, and that’s exactly what this guide will walk you through. If you want better suction, fewer clogs, and a vacuum that lasts longer, knowing how to clean Bissell CleanView Swivel the right way makes all the difference.
Why cleaning your Bissell CleanView Swivel matters
A vacuum can only do its job well when air moves freely through it. Dust, pet hair, lint, and fine dirt build up inside the tank, hose, brush roll, and filters over time. When that happens, the vacuum starts working harder and cleaning less.
49% off Today's Exclusive Deals
Limited-time Exclusive Deals. Check current discount on Amazon.
Check Price on Amazon As an Amazon Associate I earn from qualifying purchases.I’ve noticed that many people assume weak suction means the motor is failing. In my experience, it is usually just a dirty filter, a jammed brush roll, or a blocked hose. Regular maintenance helps protect performance and can also extend the life of the machine.
Keeping your Bissell CleanView Swivel clean also helps:
- Improve suction power
- Reduce odors from trapped dirt and moisture
- Keep the brush roll spinning smoothly
- Prevent overheating from airflow blockages
- Make carpet and hard floor cleaning more effective
What you need before you start
Before cleaning your Bissell CleanView Swivel, gather a few simple supplies. You do not need anything fancy.
Here is a basic list:
49% off Today's Exclusive Deals
Limited-time Exclusive Deals. Check current discount on Amazon.
Check Price on Amazon As an Amazon Associate I earn from qualifying purchases.- Mild dish soap
- Warm water
- A soft cloth or microfiber towel
- Scissors or seam ripper for tangled hair
- A small cleaning brush or old toothbrush
- A dry towel
- A trash bag for debris
Make sure the vacuum is unplugged before you begin. That sounds obvious, but it is the one step people skip when they are in a hurry. Safety first, always.
How to clean Bissell CleanView Swivel step by step
1. Empty the dirt tank
Start by removing the dirt tank from the vacuum. Carry it to a trash can and empty it fully. Tap it gently to release loose dust and debris.
If dirt is stuck inside the bin, rinse it with warm water and a little mild soap. Let it dry completely before reinstalling it. A damp tank can lead to odors and may affect performance.
2. Remove and clean the filters
Most Bissell CleanView Swivel models use washable filters. Check the pre-motor and post-motor filters, then remove them carefully.
Follow these cleaning steps:
- Tap each filter over a trash can to remove loose dust
- Rinse washable filters under warm water
- Use only water unless your model guide allows soap
- Do not wring or twist the filter
- Let the filter air dry for at least 24 hours
This step matters a lot. A clogged filter can choke suction faster than almost anything else. I once thought a vacuum had a serious motor issue, but it turned out the filter was packed so tightly with dust that air could barely pass through it.
3. Check the brush roll
Flip the vacuum over and look at the brush roll. Hair, string, and carpet fibers often wrap around it. That buildup can slow the brush or stop it from turning well.
Use scissors or a seam ripper to cut away tangled debris. Pull the loosened hair off with your fingers. If your model allows brush roll removal, take it out and clean it more thoroughly.
A clean brush roll helps:
- Lift dirt from carpet fibers
- Pick up pet hair more effectively
- Reduce strain on the belt and motor
- Improve overall cleaning results
4. Inspect the hose for clogs
The hose is another common trouble spot. Even a small clog can reduce suction a lot. Detach the hose if your model allows it, and look through it for trapped debris.
You can check for clogs by:
- Stretching the hose out fully
- Looking through it toward a light source
- Gently pushing a broom handle or similar tool through it
- Shaking out loose debris
Do not use anything sharp that could puncture the hose. I’ve seen people use metal tools here, and that usually causes more problems than it solves.
5. Clean the dirt path and nozzle area
The dirt path is the route dust takes from the floor to the tank. If that path gets blocked, suction drops fast. Use a dry cloth or soft brush to remove dust from the nozzle area and internal openings you can reach safely.
Wipe away caked dirt around the brush chamber and underside. If you notice sticky grime, use a lightly damp cloth, then dry the area right away. Moisture should never sit inside the vacuum.
6. Wipe down the exterior
A clean vacuum looks better, but this step also helps you spot hidden problems. Wipe the outside of the machine with a soft cloth. Focus on the handle, canister, wheels, and cord area.
This is a good time to check for:
- Cracks in the plastic
- Loose parts
- Damaged cord sections
- Worn belts
- Dirty wheels that may affect movement
A quick exterior wipe makes future deep cleaning easier. It also keeps dust from transferring back to your floors and furniture.
7. Let everything dry fully before reassembly
Drying is one of the most important parts of how to clean Bissell CleanView Swivel. Filters and bins that stay damp can trap odors and reduce airflow. Moisture can also create a musty smell that comes right back the next time you vacuum.
Set every washable part aside until it is completely dry. Reassemble only when you are sure there is no moisture left.
Best cleaning routine for long-lasting performance
Cleaning the Bissell CleanView Swivel once in a while is good, but a simple routine works even better. You do not need to deep clean it every week. You just need to stay ahead of buildup.
Here is a practical schedule:
- Empty the dirt tank after each use or when it reaches the fill line
- Check the brush roll weekly if you vacuum often or have pets
- Clean washable filters about once a month, or as needed
- Inspect the hose and dirt path if suction drops
- Wipe the exterior every few uses
If you live with pets, kids, or lots of foot traffic, you may need to clean it more often. In busy homes, vacuum maintenance is a bit like changing the oil in a car. Small care now prevents bigger problems later.
Common mistakes to avoid
A lot of vacuum problems come from simple cleaning mistakes. I have made a few of these myself, and they are easy to avoid once you know what to look for.
Watch out for these common errors:
- Reinstalling filters before they are fully dry
- Using too much water on washable parts
- Ignoring tangles in the brush roll
- Forgetting to check the hose for clogs
- Using harsh cleaners that can damage plastic parts
- Running the vacuum with a full dirt tank
If your Bissell CleanView Swivel still has weak suction after cleaning, do not assume the vacuum is broken right away. Double-check the airflow path. In many cases, the issue is still a blockage, a dirty filter, or a brush roll that needs more attention.
Signs your Bissell CleanView Swivel needs cleaning
Your vacuum usually gives you a few warning signs before performance drops too much. Learning them early saves time and frustration.
Look for these signs:
- Weak or uneven suction
- A burning smell or hot air
- Brush roll slowing down
- Dirt left behind on carpets
- Dust blowing back out of the vacuum
- Strange noises from the hose or brush area
When these signs show up, clean the vacuum sooner rather than later. Think of it like clearing your own breathing path. Airflow matters, and the machine can only work as well as the path you give it.
Extra tips for homes with pets
Pet hair can make a Bissell CleanView Swivel clog faster than normal dust. If you have cats or dogs, cleaning needs a little more attention. The good news is that this vacuum can still do a strong job when you stay on top of maintenance.
Helpful pet-home tips:
- Check the brush roll more often for wrapped hair
- Empty the dirt tank more frequently
- Clean filters on a tighter schedule
- Vacuum slowly to give the brush time to lift hair
- Use a grooming tool on pets to reduce shedding indoors
I’ve found that pet hair is easier to manage when you clean in layers. First remove surface hair, then vacuum the floor, then inspect the brush roll. That extra minute or two can make a big difference.
How often should you deep clean it?
For most people, a full deep clean every 1 to 3 months is enough. If you vacuum daily, have pets, or deal with a lot of fine dust, you may want to do it more often.
A good rule is simple:
- Light use: every 2 to 3 months
- Regular household use: about once a month
- Heavy use or pets: every 2 to 4 weeks
There is no perfect schedule for everyone. The best schedule is the one that matches how hard your vacuum works in your home.
Frequently Asked Questions of How to Clean Bissell CleanView Swivel
How do I clean the filter on a Bissell CleanView Swivel?
Remove the filter, tap out loose dust, and rinse it with warm water if your model allows washing. Let it dry completely for at least 24 hours before putting it back.
Why does my Bissell CleanView Swivel smell bad?
A bad smell usually comes from dirt trapped in the tank, damp filters, or hair wrapped in the brush roll. Cleaning those areas and letting washable parts dry fully usually fixes the issue.
How do I unclog the hose on my Bissell CleanView Swivel?
Detach the hose, look through it for blockages, and gently remove debris using a soft tool or by shaking it out. Avoid sharp objects because they can damage the hose.
Can I wash every part of the vacuum with water?
No, only washable parts like the dirt tank and certain filters should be rinsed with water. Electrical parts, the motor area, and any non-washable components should stay dry.
How do I know if the brush roll is dirty?
If you see hair, string, or fibers wrapped around the brush, it needs cleaning. A dirty brush roll may also spin slowly or fail to pick up debris well.
What should I do if suction is still weak after cleaning?
Check the hose, filters, dirt tank, and brush roll again for missed clogs or improper reassembly. If everything looks clean and suction is still poor, the belt or internal parts may need service.
Conclusion
Knowing how to clean Bissell CleanView Swivel is one of the easiest ways to keep your vacuum working like it should. When you clean the tank, filters, brush roll, hose, and dirt path on a regular basis, you get stronger suction and better results with less effort.
The best part is that this is not a hard job. A little steady care goes a long way, and once you build the habit, it feels quick and natural. If your vacuum has been acting tired lately, try this cleaning routine today and see the difference for yourself.
